Aluminum Alloy Motorcycle Frame

Aluminum Alloy Motorcycle Frame

The aluminum profile motorcycle stacking frame consists of a base and a column. The materials used are all 6063-T5 aluminum alloy profiles. Normally the size is 40mm×40mm. It has four standard T-shaped notches and is matched with T-bolts. The assembly is very convenient; the front end of the base is provided with a slot for positioning the front wheel of the motorcycle, and the base is provided with a lock rope loop for fixing the locomotive. At the same time, there are casters under the base to facilitate the turnover of the stacker.

If you have any question or need drawings or solutions, Please leave us a message.

get a quote

Dimensions

Weight

Material

Capacity

L

W

H

D

h

KG

 

 

1960

1075

1500

280

1270

58

aluminum

250kg

1 This product is suitable for three-dimensional storage or turnover of various motorcycles.

2 This product is equipped with a gentle stepping slope, and the motorcycle can be easily pushed in without the aid of other equipment;

3 This product is a prefabricated structure, and the column can be disassembled and placed when empty, which is convenient for storage and transportation;

4 There are lock rope loops on both sides of the base of this product for fixing the locomotive.

5 This product is equipped with a front wheel positioning groove, which makes the motorcycle more stable;

5.To make it more labor-saving, you can install electric hoist at the top the of the rack.
6.The drawer can be entirely pulled out to facilitate the lifting and loading of bulky moulds.

6 The base of this product is equipped with universal casters, which can be changed at will;

7 This product can be stacked with forklifts or aerial cranes to form a three-dimensional storage capacity and improve space utilization;

7.The lenght of the rack can be adjusted by actual needs (increasing spans).
6.The drawer can be entirely pulled out to facilitate the lifting and loading of bulky moulds.

8 The maximum dynamic load of this product can reach 300 kg;

9 This product can adjust the size of the base and column according to the size of the motorcycle;

7.The lenght of the rack can be adjusted by actual needs (increasing spans).
6.The drawer can be entirely pulled out to facilitate the lifting and loading of bulky moulds.

10 This product is made of aluminum, no need for surface treatment again

Sign up to our Newsletter

Thank you for your message. It has been sent.
There was an error trying to send your message. Please try again later.