Metal Pallet

Metal Pallet

The corrugated pallet cosist of supporting tube, upper panel, protecting steel angle and block plate. The supporting tube is of high quality carbon steel tube 100×50×2.0mm. C type steel of the panel makes the pallet skidproof and stronger. The safe edges are steel angle 30×30mm. This pallet has a high bearing ratio, up to 60 times of its own weight.

If you have any question or need drawings or solutions, Please leave us a message.

get a quote
Dimensions (mm) Weight Structure 2-way/4-way Surface Treatment Capacity (t)
A B H KG Dynamic Static
800 1200 127 27.17 Single-Side, Full 2-way Powder Coating 2 4
1000 1200 127 30.49 Single-Side, Full 2-way Powder Coating 2 4
1100 1100 127 29.55 Single-Side, Full 2-way Powder Coating 2 4
800 1200 127 26.75 Single-Side, Full 2-way Cold Galvanizing 2 4
1000 1200 127 30.01 Single-Side, Full 2-way Cold Galvanizing 2 4
1100 1100 127 29.07 Single-Side, Full 2-way Cold Galvanizing 2 4
800 1200 127 21.67 Single-Side, Half covering 2-way Powder Coating 1.5 3
1000 1200 127 23.6 Single-Side, Half covering 2-way Powder Coating 1.5 3
1100 1100 127 21.94 Single-Side, Half covering 2-way Powder Coating 1.5 3
800 1200 127 21.34 Single-Side, Half covering 2-way Cold Galvanizing 1.5 3
1000 1200 127 23.24 Single-Side, Half covering 2-way Cold Galvanizing 1.5 3
1100 1100 127 21.61 Single-Side, Half covering 2-way Cold Galvanizing 1.5 3
Customized as required

1 The number of panels can be increased or decreased according to customer’s request.

2 Panel can be added to the bottom of the pallet according to actual loading products.

3 The pallet loading with goods can be stacked if the goods are without fear of pressure and with unitized packaging.

4 The pallet can be used on selective rack, trough type rack and gravity type rack. Both folklift and hand pallet truck are applicative.

5 To load scattered goods, pallet collar can be installed to the pallet.

5.To make it more labor-saving, you can install electric hoist at the top the of the rack.
6.The drawer can be entirely pulled out to facilitate the lifting and loading of bulky moulds.

6 Both sides are processed with Angle wrapping edge, which enhances the surface effect of the pallet and reduces the risk of damage to the packaging.

7 In order to reduce the damage to the pallet caused by frequent forklift operation, rectangular tubes are arranged at both ends of the insertion direction to increase the service life.

7.The lenght of the rack can be adjusted by actual needs (increasing spans).
6.The drawer can be entirely pulled out to facilitate the lifting and loading of bulky moulds.

8 The design of corrugated panel is conducive to improve the anti-skid effect and increase the load capacity of the panel but keep the weight light.

Sign up to our Newsletter

Thank you for your message. It has been sent.
There was an error trying to send your message. Please try again later.