Forklift Pusher Pallet

Forklift Pusher Pallet

The steel pallet consist of landing leg、L-form plate、Supporting plate, all materials are used the high quality Q235 steel. Normally the landing leg is used the 60×40 rectangular tube, L type panel is bending formed by the 2mm steel panel, L type panel inner lining support plate. All joints are fully welded structure, It’s very stable, Excellent mechanical properties, light weight, So that the pallet has a high load ratio.

If you have any question or need drawings or solutions, Please leave us a message.

get a quote

Dimensions(mm)

Weiht

Material

Capacity (t)

Surface

A

B

C

KG

 

Dynamic

Static

 

1400

1150

160

47

Q235

2

6

Powder coating

1 This product can be used with multi-tooth forklift, especially suitable for grain and chemical industries;

2 This product is more convenient to use with multi-tooth forklift equipped which is settled with the side shifter;

3 The specifications of this product can be customized according to user requirements;

4 This product can be stacked after loading;

5 The product L – plate for corrugated design, anti – skid effect is good, high strength;

5.To make it more labor-saving, you can install electric hoist at the top the of the rack.
6.The drawer can be entirely pulled out to facilitate the lifting and loading of bulky moulds.

6 The support plate of this product is an arc rising transition, and the pallet will not slip when lifting;

7 An auxiliary support tube is settled at the end of the fork tooth moving direction to ensure the full use of the fork tooth;

7.The lenght of the rack can be adjusted by actual needs (increasing spans).
6.The drawer can be entirely pulled out to facilitate the lifting and loading of bulky moulds.

8 This pallet can be forked in four directions for easy operation;

Sign up to our Newsletter

Thank you for your message. It has been sent.
There was an error trying to send your message. Please try again later.